The IPC-IntrCtrl-AHB is a programmable interrupt controller designed to interface to an AMBA AHB bus. The interrupt function is necessary for any embedded microprocessor based SOC that is running a Real Time Operating System (RTOS).
The IPC-IntrCtrl-AHB Interrupt Controller is fully scalable to support 1 to 32 interrupt sources and provides a programmable interrupt register which can be used to generate an interrupt under software control. The IPC-IntrCtrl-AHB Interrupt Controller provides separate enable set and enable clear mechanisms to prevent dangerous read-modify-write operations within the critical interrupt system. Active high and active low interrupt request outputs are available to facilitate cascading of multiple interrupt controllers in order to support more than 32 interrupt sources.
Features
Programmable Interrupt Controller
Scalable (from 1 to 32 interrupts)
Optional programmable interrupt
AMBA AHB interface
Easily cascaded to support more interrupts
Separate interrupt enable set and clear mechanisms
Deliverables
The IPC-IntrCtrl-AHB package includes fully tested and verified Verilog source and Verilog testbench. The IPC-IntrCtrl-AHB can also be delivered as an FPGA Netlist for Xilinx, Altera and Actel FPGAs.
Market Category
Automotive, Communications, Consumer Electronics, Industrial and Medical, Military/Civil Aerospace
"iSine provides custom ASIC and SoC solutions to multiple market segments (see www.isine.com). The quality and support of CAST IP cores have saved us valuable time to market with these products. In this highly competitive environment, this advantage is critical to the success of our company. CAST has repeatedly and quickly helped us out of last-minute jams and multi-vendor IP interface issues.
"