Accelerated Graphics Port (AGP) is a high speed bus used to create a dedicated pathway between the graphics adapter and the processor
Browse for AGP IP / IP Cores
Controller Area Network (CAN) is a bus standard that enables microcontrollers to communicate without a host computer and is often found in automotive applications
Browse for CAN IP / IP Cores
CoreConnect is a microprocessor bus architecture for system-on-a-chip (SoC) designs.
Browse for CoreConnect IP / IP Cores
Center-tap Terminated (CTT) is a 3.3V memory bus standard
Browse for CTT IP / IP Cores
Gunning Transceiver Logic (GTL) is a standard used to provide higher data transfer speeds with smaller voltage swings and is used to drive electronic backplane busses.
Browse for GTL IP / IP Cores
High Speed Transceiver Logic (HSTL) is a signaling standard between chips on a circuit board.
Browse for HSTL IP / IP Cores
Inter-Integrated Circuit (I2C) is a bus that is used to connect peripherals to an embedded system
Browse for I2C IP / IP Cores
Lightning Data Transfer (LDT) is a bus interconnection standard that allows for fast data transfers.
Browse for LDT IP / IP Cores
Low-Voltage CMOS (LVCMOS) is a set of interface standards for connecting digital integrated circuits
Browse for LVCMOS IP / IP Cores
Low-Voltage Differential Signaling (LVDS) is a digital signaling system that enables a high speed connection over pair of wires.
Browse for LVDS IP / IP Cores
Low-Voltage TTL (LVTTL) is a set of interface standards for connecting digital integrated circuits
Browse for LVTTL IP / IP Cores
MultiMediaCard (MMC) communication protocols provide for a serial interface to the memory card
Browse for MMC IP / IP Cores
The Non-Volatile DDR2 (NV-DDR2) interface promises speeds up to 400MB/s
Browse for NV-DDR2 IP / IP Cores
Other IP includes many additional types of Bus Interface IP
Browse for Other IP / IP Cores
Parallel port busses are used in computers for connecting various peripheral devices
Browse for Parallel IP / IP Cores
Peripheral Component Interconnect (PCI) is a standard bus for connecting hardware devices in computing applications
Browse for PCI IP / IP Cores
Peripheral Component Interconnect Express (PCI Express) is a expansion card standard which is used in a wide variety of computer applications
Browse for PCI Express IP / IP Cores
Low-Voltage Positive Emitter-coupled Logic (PECL) is a high speed differential signaling standard
Browse for PVPECL IP / IP Cores
RapidIO is a high performance interconnect technology for connecting chips on a circuit board
Browse for RapidIO IP / IP Cores
Reduced Swing Differential Signaling (RSDS) is a differential I/O standard for interfaces between the timing controller and column drivers on display panels.
Browse for RSDS IP / IP Cores
Secure Digital (SD) communication protocols vary depending on the type and capacity of the non-volatile memory card
Browse for SD IP / IP Cores
Stub Series Terminated Logic (SSTL) is a group of I/O standards commonly used with Double Data Rate (DDR) DRAM memory modules
Browse for SSTL IP / IP Cores
Universal Serial Bus (USB) establishes a communication channel between a set of devices and a host and is found in both computing and mobile applications
Browse for USB IP / IP Cores